Partner PS
- Manipulators with Rigid Arms
Features
- Max weight capacity: 250 kg
- Max working radius: 2500 mm
- Max vertical lifting speed: 0,5 meters/second
- Vertical lift: 1900 mm
- Control system: solely pneumatic
- 供应:过滤压缩空气(40µm),不是lubricated
- Working pressure: 0.7 ÷ 0.8 Mpa
- Working temperature: from +0° to +45° C
- Noise level: <70 dB
- Consumption: from 30 Nl ÷ 150 Nl per working cycle
- Rotations: – constant 360° on the column and tooling axis – 300° on the intermediate axis
Execution
- Atex Column
- Atex Fixed Overhead
- Atex Overhead Running
- Column
- Fixed Overhead
- Inox Column
- Inox Fixed Overhead
- Inox Overhead Running
- Overhead Running
INDUSTRIAL MANIPULATOR PARTNER PS WITH ARTICULATED ARMS
The Manipulator PARTNER PS is a good working assistant for the operator who can work quickly, with precision and without any effort, in excellent ergonomic and safety conditions. Equipped with special gripping tools, it is particularly suitable to manually handle loads in a weightless condition in any direction.
OPERATING
A pneumatic cylinder fed with compressed-air, combined with a transmission lever system, provides balance to the load weight applied. The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced. The operator can change the load level applying a minimum force on the gripping tool or directly on the load.
| Fixed plate for floor anchoring | Autostable base-plate for forklift truck | Autostable base-plate for pallet truck |
 |
 |
 |
| Manual autostable base-plate | Trolley mounted base-plate | Floor built-in track |
 |
 |
 |
Anchor flange
The pneumatic manipulator fixed overhead version allows to eliminate any floor obstructions.
The flange of the Manipulator is supplied with holes for the anchoring with screws to a strong plate to the ceiling or to a shelf.
All movements are free and are obtained with minimum effort by the direct action of the operator on the gripping tooling or on the load.
Anchor
The Manipulator is supplied with an overhead trolley to run in a tracking system.
Tracking system
The tracking system is composed of two opposite aluminium U sections with connecting and stiffening ribs,complete with attachment points for an overhead suspension and end buffers. The junction between the various parts is done with screws.
Attachment
The attachment of the tracking system to the supporting structure is carried out by means of rods and suspension brackets